asked on

Remote Access problem

Hi experts.

My boss as created a nice little problem for me.
I had remote access nicely set up to allow just he & myself to work remotely until he decided last week to install a PHP testing server on our server and the default website was changed to the PHP server.
I now cannot achieve remote access but I can read the file listing for the wwwtest directory which holds the PHP testing server.
I have made the default web site point to C:\Inetpub\Remote (I assume that's the right path) without any improvement and tried to run the remote access wizard but this produces these errors at the end of the rraslog.txt file:

*** Running IExpress to build the package returned ERROR 80004005
*** ERROR: Cannot delete temp directory CMP13.tmp
Specifying error location (in CMAK) returned OK
*** CRRASCommit::CommitCMAK returned ERROR 80004005
*** CRRASCommit::CommitEx returned ERROR 80004005

Any suggestions, please?

Thanks
Steve

morse57

ASKER

Further to the above, an attempt to log in remotely produces teh errors:

Event Type:      Warning
Event Source:      RemoteAccess
Event Category:      None
Event ID:      20167
Date:            20/02/2006
Time:            14:20:44
User:            N/A
Computer:      AML-SERVER
Description:
No IP address is available to hand out to the dial-in client.

Event Type:      Error
Event Source:      RemoteAccess
Event Category:      None
Event ID:      20050
Date:            20/02/2006
Time:            14:20:46
User:            N/A
Computer:      AML-SERVER
Description:
The user AML\davida connected to port VPN4-4 has been disconnected because no network protocols were successfully negotiated.

Thanks
Steve

dnojcd

r u running SBS with SP 1 there?

morse57

ASKER

Hi dnojcd

Thanks very much for replying.

Sorry, I should have said; yes we are.
That said, everything was great until the default website got changed to the PHP test server, but, from your question, I guess (hope) you're onto something.

Steve

morse57

ASKER

Hi dnojcd

I am still interested in your train of thought, however the main problem now appears to be cured.
I found that if I stopped the PHP server, the correct settings were restored.
When I restarted the PHP server, the remote connection still worked but very slowly.
Can this be cured so that I can keep the PHP server running and still maintain remote access at normal speed, please.

Thanks
Steve

ASKER CERTIFIED SOLUTION

dnojcd

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial

morse57

ASKER

Hi

I'm sorry I didn't respond to your last but I didn't get any email notification of your post.

I'd like to help with your questions but I have since dumped the PHP server as it had served its purpose.

Thanks for trying to help and you're welcome to the points.

Kind regards
Steve