Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 221
  • Last Modified:

PIX VPN more then 2 sites + easy VPN server

I have a Pix 506. Which i want to connect through site-to-site connection with more then one site. Also i would like to have easy VPN server running.

Can you please help me with a config for this?
0
adenhartog
Asked:
adenhartog
1 Solution
 
nodiscoCommented:
hi there

Here is a detailed document on how to configure a PIX for IPSec tunnel to another PIX and also allow a VPN client to hit it.
Importnant note - you will see this line at the top of the page:

The VPN Client can access the LAN behind PIX 1 but not the LAN behind PIX 2. The PIX does not redirect traffic

As a PIX is unable to route traffic back out an interface it originated from, it means that the vpn client will only be able to see traffic behind the PIX to which its connecting.  Ways around this are to deploy a concentrator at a hub site to which all pix tunnels and vpn clients connect, or to have a vpn profile for each pix on your vpn client

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00800948b8.shtml

hope this helps
0
 
adenhartogAuthor Commented:
Hello,

Thx for the reply.
I will try this config and see if it will work for me
0

Featured Post

Get your problem seen by more experts

Be seen. Boost your question’s priority for more expert views and faster solutions

Tackle projects and never again get stuck behind a technical roadblock.
Join Now