?
Solved

Connecting a Modem to the console port of a Cisco 803 router

Posted on 2006-03-23
1
Medium Priority
?
389 Views
Last Modified: 2012-05-05
Hello
I would like to have remote access to the console port of a Cisco 803 Router via a dial up modem, What settings on the modem and cable pinouts are needed

Regards,
Ivan
0
Comment
Question by:icarey
1 Comment
 
LVL 6

Accepted Solution

by:
fullerms earned 500 total points
ID: 16278630
0

Featured Post

Important Lessons on Recovering from Petya

In their most recent webinar, Skyport Systems explores ways to isolate and protect critical databases to keep the core of your company safe from harm.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

750 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question