breynolds01
asked on
Netscreen 5XP Internet access from trusted to untrusted
I have a Netscreen 5XP and need to configure the device to connect to the internet from the trusted side of the firewall to the untrusted side. I've never used Netscreen and find the UI a little confusing.
Everything on the trusted side is working; however I'm unable to get to the internet. It would also be helpful to have instructions on where to port forward in the router. I have a SBS 2003 server behind the firewall and will need RDC, Exchange, FTP, Share point, and Remote Web Workplace to be available to the internet.
I'm on a tight deadline and need help desperately.
TIA
Everything on the trusted side is working; however I'm unable to get to the internet. It would also be helpful to have instructions on where to port forward in the router. I have a SBS 2003 server behind the firewall and will need RDC, Exchange, FTP, Share point, and Remote Web Workplace to be available to the internet.
I'm on a tight deadline and need help desperately.
TIA
ASKER
Turns out the Firewall is faulty. We replaced the firewall and everything is working again.
Ok then the firewall problem
any help these links which i tell you ??
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
USer guide for Netscreen 5XP
http://www.juniper.net/techpubs/hardware/netscreen-appliances/netscreen-appliances50/ug_5xp.pdf
Troubleshooting answer and question :
http://www.netscalibur.co.uk/firewall/m_faq.html
http://gta.com/downloads/external/pdf/GB-NS_VPN.pdf