smdr issue

Posted on 2006-03-27
Last Modified: 2010-04-03
Hello I had a server go down when it came backup it is not loading correctly becaue it says smdr needs to be configured. I need help
Question by:zenworksb
    1 Comment
    LVL 30

    Accepted Solution

    type in SMDR NEW  enter at the system console and accecpt the defaults

    Featured Post

    Looking for New Ways to Advertise?

    Engage with tech pros in our community with native advertising, as a Vendor Expert, and more.

    Join & Write a Comment

    If you have a USB Drive that is not recognized by Windows the problem is usually that you have too many network drives or other drives that occupy all the drive letters D: E: or F: which is the normal drive letter of a usb drive. The way to correct …
    Problem description :  Some external hard disks / USB flash drives do not show actual space as mentioned in the factory settings. This is a common problem when you use an 8 GB USB drive to make it bootable to install a firmware/ driver on a serv…
    This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
    This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

    729 members asked questions and received personalized solutions in the past 7 days.

    Join the community of 500,000 technology professionals and ask your questions.

    Join & Ask a Question

    Need Help in Real-Time?

    Connect with top rated Experts

    23 Experts available now in Live!

    Get 1:1 Help Now