Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
?
Solved

Error Code: 0x643 trying to install netframeWork 1.1

Posted on 2006-03-28
12
Medium Priority
?
11,475 Views
Last Modified: 2008-01-09
I was trying to install the ATI CAT Driver 6.3 with netframework 1.1 and got this error code....Error Code: 0x643. I called Dell Tech support and they told me that it was already on my computer and that i did not need it. But i do not see it in my add/remove programs. Ati says i have to have it for the new drivers. On Windows Auto updates it trys to update to 1.1 and it gives the same error. How do i install netframework on my PC?

Take Care,

Lester Davis


My Computer System

Dell Dimension XPS
3.2 GHz Pentium 4 @ 800MHz FSB
2048MB 400Mhz Dual-Channel DDR RAM
250 GB Serial ATA @ 7200RPM
256MB DDR ATi Radeon 9800 XT
Soundblaster Audigy 2
16 Max DVD-ROM Drive
4xDVD+RW/+R Drive w/CD-RW
Logitech Cordless Elite Keyboard
Logitech MX 700 Cordless Optical Mouse
Sony Trinitron 19-inch Monitor
Cambridge SoundWorks Speaker System
Epson Stylus Color 440 Printer
NOD32 Antivirus System
eTrust EZ Firewall
Mozilla Firefox 1.5.0.1
Mozilla Thunderbird 1.5
0
Comment
Question by:Lester_and_Julie
  • 6
  • 6
12 Comments
 
LVL 24

Expert Comment

by:Kenneniah
ID: 16314101
Instead of using Windows Update, dowlnload the full Microsoft .NET Framework Version 1.1 Redistributable Package from
http://www.microsoft.com/downloads/details.aspx?FamilyID=262d25e3-f589-4842-8157-034d1e7cf3a3&displaylang=en

Then try running the download with the following command...
dotnetfx.exe /t:%temp% /c:"msiexec.exe /fvecms %temp%\netfx.msi"

If that doesn't work, go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\.NETFramework\1.1 in regedit and delete any keys named.....
M827821028, M827822052, M827821042, M827821036, M827821031, M827821041, M841510 and M823641 if they exist.

Then try running the install again.
0
 

Author Comment

by:Lester_and_Julie
ID: 16319390
The first one almost worked. It started the process but stopped before the error message. The second one i got as far as HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates........but did not see anything that looked like .NETFramework. Is there any other thing i can try? If not, do i need to have .netframework on my computer. If there is a way to get around it for the new ATI Drivers i would.....that is the main reason i was trying to install the netframework.....cause Ati is going away from the old control panel to the C.C.C. Which needs .NetFrameWork to work. Any suggestions?

Take Care, Lester Davis


0
 

Author Comment

by:Lester_and_Julie
ID: 16330417
Dear Experts,

I also got the error below when trying to install netframework 1.1......Is there AnyBody out there with Any Suggestions !!!!!!!!!!!!!!.

Thanks, Lester Davis



Microsoft .NET Framework 1.1 Setup


Error 1935.An error occurred during the installation of assembly 'System.Messaging,Version="1.0.5000.0",PublickeyToken="b03f5f7f11d50a3a",Culture="neutral",FileVersion="1.1.4322.573"'.Please refer to Help and Support for more information.HRESULT:0x8002802F.
0
What does it mean to be "Always On"?

Is your cloud always on? With an Always On cloud you won't have to worry about downtime for maintenance or software application code updates, ensuring that your bottom line isn't affected.

 
LVL 24

Expert Comment

by:Kenneniah
ID: 16335807
One suggestion I've seen is to stop the Windows Installer service in services.msc, then try running Dotnetfx.exe.

It could be possible that a corrupt or partial previous install of .Net is getting in the way.
If you have a Windows XP CD, run setup.exe from the Support\Tools folder to install the Windows Support Tools.
Once installed, try running C:\Program Files\Support Tools\msicuu.exe.
See if Microsoft .NET framework is listed in there, and if so, select it and hit Remove.
When done, reboot, then try installing .NET again.

Do you NEED .NET? I wouldn't say you need it, but more and more programs are using it (like your ATI drivers). And no, there is no way to make something designed with .NET to work without it being installed. So, if you want the newer drivers, then yes you do need .NET installed.
0
 

Author Comment

by:Lester_and_Julie
ID: 16365561
I will try what you said in the post above. This problem i am having do you think that is why i can not check my hard disk for errors. When i try it says it can not open volume. I was just wondering if they are two in the same problem.

Take Care,

Lester Davis
0
 
LVL 24

Expert Comment

by:Kenneniah
ID: 16381280
What kind of message does chkdsk give you?
Is it "Chkdsk cannot run because the volume is in use by another
process.  Would you like to schedule this volume to be
checked the next time the system restarts? (Y/N)"
If so it just means Windows is using the volume, If you say yes it should check the drive and fix errors at the next reboot.
0
 

Author Comment

by:Lester_and_Julie
ID: 16390334
After reboot it says windows has finished checking disk and can not open volume for direct access. Takes about 2 seconds. It use to take a couple of hours to check  the hard disk for errors.
0
 
LVL 24

Expert Comment

by:Kenneniah
ID: 16392560
Hmm, yeah it sounds like something else is going on. Are there any errors in the system log in event viewer? Especially anything relating to disk?
0
 

Author Comment

by:Lester_and_Julie
ID: 16404471
These are my recent errors: I checked the Everest Ultimate Edition Event Log and this is what showed up------>

Event ID:32-Dependent Assembly Microsoft.VC80.MFCLOC could not be found and Last Error was The referenced assembly is not installed on your system.    
Event ID:59-Resolve Partial Assembly failed for Microsoft.VC80.MFCLOC.  Reference error message: The referenced assembly is not installed on your system.
Event ID:5007-TrueVector engine: File "C:\WINDOWS\Internet Logs\D2B5MM31.ldb" was corrupt and has been copied to "C:\WINDOWS\Internet Logs\xDB3.tmp".  File "C:\WINDOWS\Internet Logs\D2B5MM31.ldb" was corrupt and has been deleted.  
Event ID:7023-The Application Management service terminated with the following error:   The specified module could not be found.
Event ID:7001-The DHCP Client service depends on the NetBios over Tcpip service which failed to start because of the following error:   A device attached to the system is not functioning.  
Event ID:7026- The following boot-start or system-start driver(s) failed to load:   AFD  Fips  IPSec  MRxSmb  NetBIOS  NetBT  Processor  RasAcd  Rdbss  Tcpip  vsdatant  WS2IFSL  
Event ID:20-Installation Failure: Windows failed to install the following update with error 0x80070643: Microsoft .NET Framework 2.0: x86 (KB829019).  
Event ID:10005-Product: Microsoft .NET Framework 1.1 -- Internal Error 2908. {36C972E4-E1A5-4DFC-877E-8C291ECCA35F}  
Event ID:11935- Product: Microsoft .NET Framework 1.1 -- Error 1935.An error occurred during the installation of assembly 'System.Design,Version="1.0.5000.0",PublicKeyToken="b03f5f7f11d50a3a",Culture="neutral",FileVersion="1.1.4322.573"'. Please refer to Help and Support for more information. HRESULT: 0x8002802F. assembly interface: , function: CreateAssemblyNameObject, component: {608A2065-C580-4C1F-91ED-87286B7FDE1F}  
PDEngine:Unable to move file C:\Documents and Settings\Lester\My Documents\My Pictures\Pictures - Pro Digital Photos\ProDigitalPhotos CD 2-LD33709\ProDigitalPhotos CD 2-LD33709 026.tif after many attempts.  Skipping file.  
 


Any Ideas............................Also, I wonder if i can change my points for this question.......To me this is worth 1000 points now that i see it. If not maybe i can close it and start a new question worth more.

Take Care,

Lester Davis
0
 
LVL 24

Accepted Solution

by:
Kenneniah earned 2000 total points
ID: 16404565
Experts Exchange allows a maximum of 500 pts for any question, so no you can't raise it to 1000. However, at this point it might be a good idea to make a new question with a pointer to this one. By now this has fallen back a ways in the list and you probably won't get many other "experts" to look at it.

At this point unfortunately I'm leaning towards trying "SFC /SCANNOW" from the command prompt, and if that doesn't help, backup data and do a clean fresh reinstall of XP. Depending on how much data and programs you'd have to backup and reinstall, it might end up taking less time to continuing trying to track this down. If you do post a pointer question to this one, maybe someone else will take a look and have some ideas.
0
 

Author Comment

by:Lester_and_Julie
ID: 16444549
At this point unfortunately I'm leaning towards trying "SFC /SCANNOW" from the command prompt, and if that doesn't help, backup data and do a clean fresh reinstall of XP. Depending on how much data and programs you'd have to backup and reinstall, it might end up taking less time to continuing trying to track this down. If you do post a pointer question to this one, maybe someone else will take a look and have some ideas.


What does this do? "SFC /SCANNOW". I started to reformat and do a clean install but hit the R for repair instead of clean install. I think i may just not wory about .netframework. But you have been very helpful and i have learned a good bit from you so i think i will take your advice and start a new question. But since you have helped me, not nessilty solve my problem but helping me understand a lot of things about my computer i think i will close this question out, award you the points and regroup see how my computer acts and start fresh with a new set of questions. Thanks so much for your help.

Take Care, Lester Davis
0
 
LVL 24

Expert Comment

by:Kenneniah
ID: 16446532
Thanks for the points, and good luck!

SFC is System File Checker, a part of Windows XP that will scan system files and try to restore any corrupt or modfied ones.
0

Featured Post

VIDEO: THE CONCERTO CLOUD FOR HEALTHCARE

Modern healthcare requires a modern cloud. View this brief video to understand how the Concerto Cloud for Healthcare can help your organization.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you build your web application in Visual Studio you'll get at least a few binaries, or .DLL, files in your bin folder. However, there is more compiling to be done. Normally this would happen when an ASP.NET resource within the web site is request…
This article provides a convenient collection of links to Microsoft provided Security Patches for operating systems that have reached their End of Life support cycle. Included operating systems covered by this article are Windows XP,  Windows Server…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…
With just a little bit of  SQL and VBA, many doors open to cool things like synchronize a list box to display data relevant to other information on a form.  If you have never written code or looked at an SQL statement before, no problem! ...  give i…
Suggested Courses

580 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question