mputnam31
asked on
Symantec VPN error connecting
Error connecting tunnel to 68.125.0.129. The server rejected the ISAKMP security association. Make sure the phase1 IDs, shared key, and IKE policy are correct. Terminating connect operation.
I am using Client to gateway VPN. Symantec Gateway 320. On home side I am using sbcglobal with a 2 wire DSL connection. I have a wireless network but am connecting directly to modem to do this because of subnet conflict (If you know how to fix this it would also be helpful). I was able to connect for a long time when I had cable, but now switched to SBC and got the following error.
I am using Client to gateway VPN. Symantec Gateway 320. On home side I am using sbcglobal with a 2 wire DSL connection. I have a wireless network but am connecting directly to modem to do this because of subnet conflict (If you know how to fix this it would also be helpful). I was able to connect for a long time when I had cable, but now switched to SBC and got the following error.
ASKER
Already have that article, nothing on it works. Good try though.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Please close this question.
here is symatec soluation for that
http://service1.symantec.com/SUPPORT/ent-gate.nsf/37b2c8a4989b899a88256dda00599189/781e4e9244db3f1e882570ee007d8a07?OpenDocument&src=bar_sch_nam&seg=ag
Maheen