?
Solved

Problem browsing using D-Link DI-624

Posted on 2006-04-03
1
Medium Priority
?
235 Views
Last Modified: 2010-04-17
I just installed a DI-624 between two of my networks. On the WAN side of the router I have a server named VESTSERV with an ip of 172.19.112.10

On the LAN side I connect wireless and VESTSERV is entered in the local hosts-file.

From the command prompt on the client I can ping VESTSERV and get reply from the correct ip, but in the browser I can only see the shares if I connect with the ip-adress.
If I try to browse VESTSERV I get a network unavailable error message.

If I remove the DI-624 and use the old router there is no problem whatsoever.
Connecting the client to the WAN side of the router also removed the problem, so it seems to me that the DI-624 is blocking the traffic.

Any suggestions on how to get around this problem?



0
Comment
Question by:rayves
1 Comment
 
LVL 4

Accepted Solution

by:
omegamueller earned 2000 total points
ID: 16383860
You need to set a defualt route on your client
0

Featured Post

What does it mean to be "Always On"?

Is your cloud always on? With an Always On cloud you won't have to worry about downtime for maintenance or software application code updates, ensuring that your bottom line isn't affected.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
Tired of waiting for your show or movie to load?  Are buffering issues a constant problem with your internet connection?  Check this article out to see if these simple adjustments are the solution for you.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question