Hingham
asked on
Help with Mini Dump Analysis
I was looking for some clues as to what might be causing this machine's BSOD's. Here is the crash analysis from windbg. Any help is appreciated.
************************** ********** ********** ********** ********** ********** ***
* *
* Bugcheck Analysis *
* *
************************** ********** ********** ********** ********** ********** ***
Use !analyze -v to get detailed debugging information.
BugCheck 1000008E, {c000001d, 804dbe05, f8ad3e08, 0}
Probably caused by : hardware ( nt!KiDispatchInterrupt+2 )
Followup: MachineOwner
---------
kd> !analyze -v
************************** ********** ********** ********** ********** ********** ***
* *
* Bugcheck Analysis *
* *
************************** ********** ********** ********** ********** ********** ***
KERNEL_MODE_EXCEPTION_NOT_ HANDLED_M (1000008e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c000001d, The exception code that was not handled
Arg2: 804dbe05, The address that the exception occurred at
Arg3: f8ad3e08, Trap Frame
Arg4: 00000000
Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc000001d - {EXCEPTION} Illegal Instruction An attempt was made to execute an illegal instruction.
FAULTING_IP:
nt!KiDispatchInterrupt+2
804dbe05 f08945f0 lock mov [ebp-0x10],eax
TRAP_FRAME: f8ad3e08 -- (.trap fffffffff8ad3e08)
ErrCode = 00000000
eax=f8ad3e88 ebx=82c8fea0 ecx=82c8fe08 edx=f8ad3e88 esi=82c8fe98 edi=00000000
eip=804dbe05 esp=f8ad3e7c ebp=f8ad3e98 iopl=0 nv up ei ng nz ac pe cy
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010293
nt!KiDispatchInterrupt+0x2 :
804dbe05 f08945f0 lock mov [ebp-0x10],eax ss:0010:f8ad3e88=82c8fe08
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0x8E
MISALIGNED_IP:
nt!KiDispatchInterrupt+2
804dbe05 f08945f0 lock mov [ebp-0x10],eax
LAST_CONTROL_TRANSFER: from f8ad3e98 to 804dbe05
FAILED_INSTRUCTION_ADDRESS :
nt!KiDispatchInterrupt+2
804dbe05 f08945f0 lock mov [ebp-0x10],eax
STACK_TEXT:
f8ad3e78 f8ad3e98 82c8fe98 f8ad3eb0 82c8fe08 nt!KiDispatchInterrupt+0x2
WARNING: Frame IP not in any known module. Following frames may be wrong.
f8ad3e98 804dc4a8 df927ccf 000000c5 f8ad3fc0 0xf8ad3e98
f8ad3fa4 804dc378 df927751 00000000 ffdff000 nt!KiInsertTreeTimer+0x77
f8ad3fd0 804dbbd4 80559280 00000000 00005dc5 nt!KiWaitTest+0x56
f8ad3fd4 80559280 00000000 00005dc5 00000000 nt!ExReleaseResourceLite+0 x4
ffdff980 00000000 f8ad4000 00006372 00000000 nt!VdmStringIoBuffer+0x3a0
STACK_COMMAND: .bugcheck ; kb
FOLLOWUP_IP:
nt!KiDispatchInterrupt+2
804dbe05 f08945f0 lock mov [ebp-0x10],eax
FAULTING_SOURCE_CODE:
SYMBOL_STACK_INDEX: 0
FOLLOWUP_NAME: MachineOwner
SYMBOL_NAME: nt!KiDispatchInterrupt+2
IMAGE_NAME: hardware
DEBUG_FLR_IMAGE_TIMESTAMP: 0
MODULE_NAME: hardware
FAILURE_BUCKET_ID: IP_MISALIGNED
BUCKET_ID: IP_MISALIGNED
Followup: MachineOwner
**************************
* *
* Bugcheck Analysis *
* *
**************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000008E, {c000001d, 804dbe05, f8ad3e08, 0}
Probably caused by : hardware ( nt!KiDispatchInterrupt+2 )
Followup: MachineOwner
---------
kd> !analyze -v
**************************
* *
* Bugcheck Analysis *
* *
**************************
KERNEL_MODE_EXCEPTION_NOT_
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c000001d, The exception code that was not handled
Arg2: 804dbe05, The address that the exception occurred at
Arg3: f8ad3e08, Trap Frame
Arg4: 00000000
Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc000001d - {EXCEPTION} Illegal Instruction An attempt was made to execute an illegal instruction.
FAULTING_IP:
nt!KiDispatchInterrupt+2
804dbe05 f08945f0 lock mov [ebp-0x10],eax
TRAP_FRAME: f8ad3e08 -- (.trap fffffffff8ad3e08)
ErrCode = 00000000
eax=f8ad3e88 ebx=82c8fea0 ecx=82c8fe08 edx=f8ad3e88 esi=82c8fe98 edi=00000000
eip=804dbe05 esp=f8ad3e7c ebp=f8ad3e98 iopl=0 nv up ei ng nz ac pe cy
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010293
nt!KiDispatchInterrupt+0x2
804dbe05 f08945f0 lock mov [ebp-0x10],eax ss:0010:f8ad3e88=82c8fe08
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0x8E
MISALIGNED_IP:
nt!KiDispatchInterrupt+2
804dbe05 f08945f0 lock mov [ebp-0x10],eax
LAST_CONTROL_TRANSFER: from f8ad3e98 to 804dbe05
FAILED_INSTRUCTION_ADDRESS
nt!KiDispatchInterrupt+2
804dbe05 f08945f0 lock mov [ebp-0x10],eax
STACK_TEXT:
f8ad3e78 f8ad3e98 82c8fe98 f8ad3eb0 82c8fe08 nt!KiDispatchInterrupt+0x2
WARNING: Frame IP not in any known module. Following frames may be wrong.
f8ad3e98 804dc4a8 df927ccf 000000c5 f8ad3fc0 0xf8ad3e98
f8ad3fa4 804dc378 df927751 00000000 ffdff000 nt!KiInsertTreeTimer+0x77
f8ad3fd0 804dbbd4 80559280 00000000 00005dc5 nt!KiWaitTest+0x56
f8ad3fd4 80559280 00000000 00005dc5 00000000 nt!ExReleaseResourceLite+0
ffdff980 00000000 f8ad4000 00006372 00000000 nt!VdmStringIoBuffer+0x3a0
STACK_COMMAND: .bugcheck ; kb
FOLLOWUP_IP:
nt!KiDispatchInterrupt+2
804dbe05 f08945f0 lock mov [ebp-0x10],eax
FAULTING_SOURCE_CODE:
SYMBOL_STACK_INDEX: 0
FOLLOWUP_NAME: MachineOwner
SYMBOL_NAME: nt!KiDispatchInterrupt+2
IMAGE_NAME: hardware
DEBUG_FLR_IMAGE_TIMESTAMP:
MODULE_NAME: hardware
FAILURE_BUCKET_ID: IP_MISALIGNED
BUCKET_ID: IP_MISALIGNED
Followup: MachineOwner
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.