?
Solved

Using route command in xp to allow range of ip's

Posted on 2006-04-05
1
Medium Priority
?
828 Views
Last Modified: 2008-02-01
I have an xp machine that is using 2 nic cards, one on an ipvpn that has a default gateway set and a 2nd without a default gateway set that travels ouot over the internet.   Anything I want to come in from outside I have to set up a static route for to use the 2nd nic card.  Up til now ouor clients have only ever gone through 1 ip address, now we have one that wants to set a range.  Is this the command I need to use?

route add -p 170.184.0.0 mask 255.255.0.0 208.48.180.25
0
Comment
Question by:jlmoyni
1 Comment
 
LVL 4

Accepted Solution

by:
xcromx earned 150 total points
ID: 16384560
0

Featured Post

Concerto's Cloud Advisory Services

Want to avoid the missteps to gaining all the benefits of the cloud? Learn more about the different assessment options from our Cloud Advisory team.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article, the configuration steps in Zabbix to monitor devices via SNMP will be discussed with some real examples on Cisco Router/Switch, Catalyst Switch, NAS Synology device.
LinkedIn blogging is great for networking, building up an audience, and expanding your influence as well. However, if you want to achieve these results, you need to work really hard to make your post worth liking and sharing. Here are 4 tips that ca…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question