• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 248
  • Last Modified:

Windows Server 2003 VPN and NAT

Experts,

Please may I ask help regarding the configuration of VPN beyond NAT/Firewalled Server.  I'm using only one PUBLIC IP.

I've done setting up NAT and VPN enabled configuration and everything works fine. Ports used by VPN is allowed. I've also tried connecting to the VPN from a public ip and it works. My Internal LAN IP is 192.168.0.1 and VPN successful IP is 192.168.0.20(DHCPed). When I ping/access 192.168.0.1 there is no contact.

Experts is there something I forgot to configure?


Thank you very much.

marvel
0
marvelsoft
Asked:
marvelsoft
1 Solution
 
TheCleanerCommented:
There are multiple problems if the home network and the LAN network are on the same subnet (in this case it sounds like they may be with the 192.168).

http://www.chicagotech.net/Q&A/vpn20.htm

Can you confirm if they are or aren't?
0

Featured Post

Get your Conversational Ransomware Defense e‑book

This e-book gives you an insight into the ransomware threat and reviews the fundamentals of top-notch ransomware preparedness and recovery. To help you protect yourself and your organization. The initial infection may be inevitable, so the best protection is to be fully prepared.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now