Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
?
Solved

How do I setup vlans on a Cisco 2948G L3 switch router

Posted on 2006-04-07
2
Medium Priority
?
1,531 Views
Last Modified: 2013-11-30
I need to set up various groups of ports into vlans on the Cisco 2948G L3 switch router that I have.  I need someone to hive me details since this is different than the normal L2 switches I am used to.

Thankss
0
Comment
Question by:power1007
2 Comments
 
LVL 8

Accepted Solution

by:
MarkDozier earned 1500 total points
ID: 16404178
Using the link provided you should be able to do most it right away. If you are used to layer 2 cisco switches the syntax is the same.
First be sure to draw a picture of what you want to accomplish. Then write the config.

http://www.cisco.com/en/US/products/hw/switches/ps606/products_configuration_guide_chapter09186a008007d102.html
0
 

Author Comment

by:power1007
ID: 16417034
This shows me how to configure sub interfaces.  I basically just want to configure groups of interfaces into 3 seperate vlans to segment them from each other.  Can some one please show me a sample config on how to accomplish this?

I want ports 1-16 in VLAN 1
Ports 29-42 in VLAN 2
and Ports 43-48 in VLAN 3

In layer 2 switches, I could simply create the vlan then go into each interface and use the switchport access command to add the interface to the vlan.  Is there something similar for this switch?

thanks!
0

Featured Post

Upgrade your Question Security!

Your question, your audience. Choose who sees your identity—and your question—with question security.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Make the most of your online learning experience.
Unable to change the program that handles the scan event from a network attached Canon/Brother printer/scanner. This means you'll always have to choose which program handles this action, e.g. ControlCenter4 (in the case of a Brother).
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

571 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question