[Webinar] Learn how to a build a cloud-first strategyRegister Now

x
?
Solved

DHCP server / Cisco 3560g with 1 VLAN, how to get dhcp working on second vlan

Posted on 2006-04-18
2
Medium Priority
?
548 Views
Last Modified: 2008-03-06
I currently have a network setup on 192.168.100.x.  I have created a second VLAN on our Cisco 3560g which i would like to have dhcp on.  How can i have my dhcp server on 192.168.100.5 hosting on 192.168.200.x?  I don't see anything for a dhcp or ip helper on the cisco?

Can it not be done?  The only thing on the cisco is an ip forwarder?

Thanks,
0
Comment
Question by:lgropper
2 Comments
 
LVL 50

Accepted Solution

by:
Don Johnston earned 1000 total points
ID: 16483911
You'll need to create a second scope of addresses on your DHCP server. Then, on the new VLAN interface of the 3560 switch, use the "ip helper-address 192.168.100.5" command to point it to the IP address of the DHCP server (assuming that 192.168.100.5 is your DHCP server).

-Don
0
 

Author Comment

by:lgropper
ID: 16488574
perfect! thanks for the quick reply!
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

868 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question