ISA2004 and RDC to non-standard port

I am on a SBS2003 Server with ISA2004
I can make remote desktop connections from the SBS2003 server to external systems on the default RDC port 3389
I would like to make a remote desktop connection from the SBS2003 server to an outside terminal server that has been set up to listen on port 10941. How do I do this?

DaveChoiceTechAsked:
Who is Participating?
 
Keith AlabasterEnterprise ArchitectCommented:
Not a problem.
Open the gui
click on firewall policy
righ-click firewall policy and select new access rule
Give it a name
select allow
In selected protocols, click add
select user-defined then click new - protocol at the top of the small window.
call it rdp 10941
Click new on the primary connection
put 10941 in the start and end port box - click ok
click next - next - finish
Open the user-defined protocols and now select rdp 10941 then close - next
In the rule sources, select add. Open networks and choose local host and internal
click close - next
in destinations, select external - close - next
Select all users then finish. Apply the rule.

Ensue tcp port 10941 is allowed out of your external router/firewall device.
Job done :)

regards
keith
ISA MCT


0
 
DaveChoiceTechAuthor Commented:
Right on!.

In doing this I noticed a built in rule "SBS Internet Access Rule" that appears to allow "All Outbound Traffic" fron "All Protected Networks" to "External" for "SBS Internet Users". Why isn't port 10941 already covered in this rule under "All Outbound Traffic"?
0
 
Keith AlabasterEnterprise ArchitectCommented:
because it covers traffic listed in the supplied, existing protocols. 10941 was not an existing protocol; you had to create it.
0
 
Keith AlabasterEnterprise ArchitectCommented:
o, thanks for the points :)
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.