Cisco 7200 - IOS upgrade options

Posted on 2006-04-24
Last Modified: 2007-12-19
I have a Cisco 7204VXR that I'd like to upgrade the IOS on.  I tried using software advisor, but it kept returning that the image name was invalid.  

It looks like the correct option is 12.2(34) - c7200-ik9o3s-mz.12.2-34.  Does everyone concurr?

Here is the show ver

sh ver
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IK9O3S-M), Version 12.2(17), RELEASE SOFTWARE (fc3
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 15-May-03 18:12 by srani
Image text-base: 0x60128940, data-base: 0x61499000

ROM: System Bootstrap, Version 12.2(1r) [dchih 1r], RELEASE SOFTWARE (fc1)
BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.1(8a)E, EARLY DEPLOYMENT RELE

System image file is "disk0:c7200-ik9o3s-mz.122-17.bin"

cisco 7204VXR (NPE225) processor (revision A) with 114688K/16384K bytes of memor
Processor board ID 29811582
R527x CPU at 262Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache
4 slot VXR midplane, Version 2.7

Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
4 Ethernet/IEEE 802.3 interface(s)
3 FastEthernet/IEEE 802.3 interface(s)
8 Serial network interface(s)
8 Channelized T1/PRI port(s)
125K bytes of non-volatile configuration memory.

46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
8192K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
Question by:blotto99
    LVL 50

    Accepted Solution

    Yes. That looks to be the newest GD release.

    LVL 3

    Expert Comment

    Just curious. Why are you upgrading?

    Author Comment

    Like I mentioned, I've had a couple of unexplained reboots and can't find any reason, so I figure I should be on the most current release in case it is just a bug issue.
    LVL 3

    Expert Comment

    Ah. That's a good reason for an upgrade.

    Featured Post

    Why You Should Analyze Threat Actor TTPs

    After years of analyzing threat actor behavior, it’s become clear that at any given time there are specific tactics, techniques, and procedures (TTPs) that are particularly prevalent. By analyzing and understanding these TTPs, you can dramatically enhance your security program.

    Join & Write a Comment

    Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
    There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
    After creating this article (, I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
    After creating this article (, I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

    755 members asked questions and received personalized solutions in the past 7 days.

    Join the community of 500,000 technology professionals and ask your questions.

    Join & Ask a Question

    Need Help in Real-Time?

    Connect with top rated Experts

    20 Experts available now in Live!

    Get 1:1 Help Now