• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 578
  • Last Modified:

VPN?

I have a Linksys RV0041 VPN router. I'm trying to setup VPN access for remote users. I've can't get the client to connect. I'm using the Linksys VPN client software. Any suggestions on what would make this work?
0
wrt1mea
Asked:
wrt1mea
  • 2
1 Solution
 
rairdonmCommented:
Please provide fictitous ip address and subnet scheme.  Don't provide your actual ip addresses.
0
 
Rob WilliamsCommented:
To the best of my knowledge the QuickVPN software does not work with the RV0041 as of yet, even though the manual says it does. To set it up on the models that do support it, the RV0042, RV0082, RV016, and WRV54G, there is a separate VPN set up page just for the QuickVPN, which simply requires you create a user, password, and activate the user. There are no IP or encryption options available. I suspect your best bet at this point would be to obtain a 3rd party VPN client like the GreenBow and configure that.
GreenBow client is available from:
http://www.thegreenbow.com/vpn.html
Configuration instructions for the RV082 should be similar for this client:
http://www.thegreenbow.fr/doc/tgbvpn_cg_LinksysRV082_en.pdf

0
 
Rob WilliamsCommented:
Thanks wrt1mea,
--Rob
0

Featured Post

What Security Threats Are We Predicting for 2018?

Cryptocurrency, IoT botnets, MFA, and more! Hackers are already planning their next big attacks for 2018. Learn what you might face, and how to defend against it with our 2018 security predictions.

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now