asked on

Router and Servers

I have a DrayTek Vigor2600 plus adsl router. I know how to use Open port settings to direct traffic to an internal server. This has worked fine so far but now i need to do more. My ISP has given me a range of IP address. I was wondering how do i use them?

If i have available to me a set up IP addresses 83.218.134.50-54 on subnet 255.255.255.248 how do I get them to be directed to an internal server?

The range of IP addresses is not the same IP address as the one I use when surfing the net.

JimsZ

have you tried to specify each network card to use a different static ip address and set the address manually?

ASKER CERTIFIED SOLUTION

giltjr

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial

jaycangel

ASKER

How would i be able to tell if my DrayTek router can support multiple public IP address. It's the Vigor2600 plus adsl router.

Thanks

giltjr

I look at their web site and they say the box can do "multi NAT". I assume that this means it can support multiple public to multiple private NAT'ing.

Does the setup page have a NAT link under the Advanced options? Click on that and see what menu it brings up and what options are on that Menu.

giltjr

Here is what they document on their FAQ page.

http://www.draytek.com/support/support_note/router/faq/advance/11.php

SOLUTION

RICHARDloire

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial