CRCtechnologies
asked on
PXE E53 No boot filename received when using RIS
I have a HP dc5150 MT and am trying to boot into RIS using the Broadcom 57x NIC that uses the UNDI PXE-2.1 environment.
However when I hit 'F12' to do a LAN boot
The HP UNDI PXE-2.1 v8.1.55 errors with:
PXE E53
'No bootfile name received'
The RIS server is authorized as a DHCP server and that works fine as I can boot from other machines into the RIS environment that have 3com PCI Nic Card with the use of the RIS boot disk. It seems to be the broadcom NIC I am having problems with or possibly the UNDI PXE-2.1 environment.
I have prestaged the computer in AD using it's UUID number but still no joy.
Any tips?? Thanks,
However when I hit 'F12' to do a LAN boot
The HP UNDI PXE-2.1 v8.1.55 errors with:
PXE E53
'No bootfile name received'
The RIS server is authorized as a DHCP server and that works fine as I can boot from other machines into the RIS environment that have 3com PCI Nic Card with the use of the RIS boot disk. It seems to be the broadcom NIC I am having problems with or possibly the UNDI PXE-2.1 environment.
I have prestaged the computer in AD using it's UUID number but still no joy.
Any tips?? Thanks,
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.