Allowed bidirectional traffic on port 6464 on Cisco PIX 515E

I would like to allow bidirectional traffic through port 6464 on my pix 515E.  What is the best way to do this?
exiscapitalAsked:
Who is Participating?
 
Keith AlabasterEnterprise ArchitectCommented:
I'll make the assumption that it can be initiated from inside or outside.

As long as you have a global (outside) and a matching NAT statement with no outgoing ACL applied. the outbound traffic (and the response) will work ok.
For example
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.255.0 0 0


Outside source = any
inside device = 192.168.0.9
your outside pix interface = 2.2.2.1 - .8

static (inside,outside) tcp 2.2.2.3 6464 192.168.0.9 6464 netmask 255.255.255.255 0 0
access-list outside-coming-in permit tcp any host 2.2.2.3 eq 6464
access-group outside-coming-in in interface outside
no sysopt norproxyarp outside
0
 
Keith AlabasterEnterprise ArchitectCommented:
That doesn't really give us much to go on does it.

Are you talking about from any device to any device?
Are you talking about allowing this outgoing and the outside to respond or vice-a-versa?
is the outside going to initiate the connection?
0
 
exiscapitalAuthor Commented:
It would be for any device to any device.  

0
 
Keith AlabasterEnterprise ArchitectCommented:
OK, so you are just going to let the 6464 incoming pass through rather than forwarding to a specific address?
0
 
exiscapitalAuthor Commented:
Yes just going to let it pass though rather than forwarding to specific address.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.