• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1120
  • Last Modified:

telnet into 3750 switch stack

i have two cisco 3750 switches stacked that share the same IP address. I can telnet into SW1. How do I telnet into SW2?
0
captjjt
Asked:
captjjt
1 Solution
 
calvinetterCommented:
You don't - that's what happens when they're part of a stack: they share the same IP, config, etc & essentially function like one big switch.  I've configured 3750's but never setup a stack on them, but if you want to access one of the stack members you can have limited CLI access to the member switch via the master switch:

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_guide_chapter09186a00805a656c.html#wp1177242

cheers
0
 
captjjtAuthor Commented:
we figured that out earlier today. thanks fer the help.
Appearantly you can run remote commands as well.

PHL-BUS-SW1#remote command 2 sh ver
Switch : 2 :
------------
...
 
PHL-BUS-SW1-2 uptime is 2 days, 1 hour, 21 minutes
System returned to ROM by power-on
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Free Tool: IP Lookup

Get more info about an IP address or domain name, such as organization, abuse contacts and geolocation.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now