I am trying to get this working, and it isn't doing it for me.
I have a Cisco 1760 which is quite happily running with a WIC-1ADSL and a connection to our ISP.
I recently added a WIC-1ENET, based on this question -> http:Q_21846152.html
The WIC-1ENET has now replaced the FastEthernet0 as the connection to the LAN (which I can undo, if required)
Now, that all works, and here comes the tricky part.
I have a newly acquired ADSL2+ connection and a Netcomm NB5 ADSL2+ modem. The connection and modem work great, and my laptop (when plugged in directly) has no problems connecting with this at all.
I want to plug this modem into the routers FastEthernet0 port, and get the router to use both the ADSL1 and the ADSL2+ connections.
In the longer term, I would like to be able to route all my lan clients through the ADSL2+ and all my servers through the ADSL1 (all our extrernal IP addresses are through ADSL1).
I have a sanitized copy of my config here -> http://www.redseatechnologies.com.au/router/config.txt
There is a copy of the NB5 guide here -> http://www.redseatechnologies.com.au/router/nb5.pdf
Any help you can provide would be greatly appreciated!