• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 2293
  • Last Modified:

WinMgmt errors in event log, started after applying latest updates

Hi,

The following message shows up once a minute in the application event log:

Event filter with query "SELECT * FROM __InstanceDeletionEvent  WITHIN 600 WHERE  TargetInstance isa "Win32_PnPEntity"" could not be (re)activated in namespace "//./root/CIMV2" because of error 0x8004106c. Events may not be delivered through this filter until the problem is corrected.

What could be causing this error and how do I resolve it.  Suspect possibly the health monitor or the exchange store monitoring is generating it but not sure.

Thanks
0
tcforce
Asked:
tcforce
  • 5
  • 3
1 Solution
 
dhoustonieCommented:
Do you have the event id from the event logs?

David Houston
0
 
tcforceAuthor Commented:
Event ID is 10
0
 
dhoustonieCommented:
Have you tried any of this:

http://www.winserverhelp.com/ftopic45109.html

David
0
Concerto Cloud for Software Providers & ISVs

Can Concerto Cloud Services help you focus on evolving your application offerings, while delivering the best cloud experience to your customers? From DevOps to revenue models and customer support, the answer is yes!

Learn how Concerto can help you.

 
tcforceAuthor Commented:
I have not obtained the quick fix as it appears to be chargeable and was hoping to avoid that.  The version number of my esscli.dll is 5.2.3790.1830 so it looks like it may need the fix.  
0
 
dhoustonieCommented:
All hotfixes are free you do not have to pay for it, just say when you call them that you are looking for that patch.

David Houston
0
 
tcforceAuthor Commented:
I have obtained the hot fix and will try to apply it tomorrow.

Thanks, will let you know how it goes.
0
 
tcforceAuthor Commented:
I tried to apply the quick fix and it states the version of the service pack installed is later than the quick fix so I guess no go on that.

How can I determine which monitor is generating the message?

Thanks
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
There are MANY more troubleshooting ideas in the link that David posted above... some which talk about what to do if SP1 is installed... read  through them thoroughly.

Jeff
TechSoEasy
0
 
tcforceAuthor Commented:
Thanks for all the help guys.  I did actually try most of the ideas on the link.  Unfortunately, I have to schedule reboots for this server so had to wait on that.  I ended up applying the latest .net (2.0 - doubt that did it, was addressing a different issue), rebooted - regular, and ran "winmgmt /resyncperf" as soon as the server came up.  The messages have been gone since Friday - so looks good so far.
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

  • 5
  • 3
Tackle projects and never again get stuck behind a technical roadblock.
Join Now