neowolf219
asked on
CatOS commands vs Native IOS commands
Hey guys,
I was curious if anybody had a good diagram (or know of where one is at) that has a good reference for comparing CatOS and Native IOS commands.
For instance:
CatOS Native IOS
---------
set (system-name, name??? can't remember which off-hand) config#hostname <router hostname>
I was curious if anybody had a good diagram (or know of where one is at) that has a good reference for comparing CatOS and Native IOS commands.
For instance:
CatOS Native IOS
---------
set (system-name, name??? can't remember which off-hand) config#hostname <router hostname>
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
I'm being a bit stupid, that is the same link. Sorry, I'll see if I can't find the other way and post.
Doubt it, Cisco is pushing customers toward IOS, so they're trying to make it easier.
ASKER
yeah, figured as much. Just had to work on and old 5000 the other day, and I couldn't remember some of the commands (I got into networking right when the CatOS was starting to fade out).
Thanks anyway! Worst case I can get a cat config, enter it in, and use it as reference.
Thanks anyway! Worst case I can get a cat config, enter it in, and use it as reference.
ASKER
http://www.cisco.com/cgi-bin/Support/CatCfgConversion/catcfg_xlat.pl