?
Solved

site-to-site vpn

Posted on 2006-06-03
1
Medium Priority
?
286 Views
Last Modified: 2010-04-12
i tried to config site-to-site vpn on two pix515e, i enter the command in console, after that, i try to 'show config', however i don't found those command, but seem those command accept it.
how do i check about it and test the site-to-site vpn work?
0
Comment
Question by:edmondto2
1 Comment
 
LVL 10

Accepted Solution

by:
plemieux72 earned 100 total points
ID: 16825641
Did you save your config using the command write memory?

Here are the configuration guides for all the PIX OS versions:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/index.htm
0

Featured Post

What Security Threats Are We Predicting for 2018?

Cryptocurrency, IoT botnets, MFA, and more! Hackers are already planning their next big attacks for 2018. Learn what you might face, and how to defend against it with our 2018 security predictions.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Like many others, when I created a Windows 2008 RRAS VPN server, I connected via PPTP, and still do, but there are problems that can arise from solely using PPTP.  One particular problem was that the CFO of the company used a Virgin Broadband Wirele…
This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question