Solved

Have an interview and need some help.  FOR 500

Posted on 2006-06-08
2
436 Views
Last Modified: 2013-11-16
So I need some common connectivity questions and answers as it regards to Cisco VPNs; site-to-site VPNs to be specific.  Whomever has the most comprehensive the fastest gets the points.  Please help!!!!!
0
Comment
Question by:dcoluzzi
2 Comments
 
LVL 18

Accepted Solution

by:
Sam Panwar earned 400 total points
ID: 16867172
0
 
LVL 44

Assisted Solution

by:scrathcyboy
scrathcyboy earned 100 total points
ID: 16868019
Cisco VPN setup and site2site VPN is NOT simple.  It would be if people stuck to routers.  But people have this insane desire to punish themselves with using windows boxes as VPN server, instead of leaving it to routers that are dedicated to the function.  Routers are so easy to setup and work so well, you have to wonder why peopl are so masochistic as to inflict endless punishement on themselves by using windows servers to VPN when they cant even do it properly.

If you go for job, remember, ILLOGIC prevails in VPN.  Most people choose the WORST VPN servers, and they totally ignore the simplest.  Remember that CISCO makes Linksys too, and these are so simple and so reliable, none of the setup issues of CIsco, they work out of the box with 5 mins configuration.

There is everything from the simplest Linksys, to the highly configurable Cisco, to the solution that is a total pain in the neck -- MS servers.  In your job, you will have to contend with them all!!!  Good luck.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Valid LIN protocol Protected ID values 1 38
Reseller Hosting 2 90
Firewall report connections 8 73
ASA Tunnel 18 30
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
This article will inform Clients about common and important expectations from the freelancers (Experts) who are looking at your Gig.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question