Solved

Cisco 1200 DHCP issue

Posted on 2006-06-10
2
607 Views
Last Modified: 2013-11-16
We have a cisco 1200 that is plugged into a Cisco 2950T switch our network is fully functional and working our DHCP server is a windows 2003 SBS server that has worked fine for years issueing IPs to all the hard wired clients and VPN clients etc.  Ok so the 1200 WAP is plugged into the network it gets an IP fine but when a wireless client gets on the network via the 1200 WAP the client times out when trying to get a valid IP via DHCP the WAP doesnt have MAC filtering and its not an encryption issue because if i look at the GUI log screen i get the following for clients (Interface Dot11Radio0, Station 0016.6f6e.4683 Associated KEY_MGMT[WPA PSK] )  and not a failed to authenticate.  so what do you guys think?  Oh also i have tried a cisco 1100 WAP and got the same result i have also taken that same 1100 and plugged it into my home network and it worked just fine and DHCP worked etc.
0
Comment
Question by:adpro
2 Comments
 
LVL 1

Accepted Solution

by:
bimalprakashsharma earned 500 total points
ID: 16878818


have you got the ip helper address set on the switch..
0
 

Author Comment

by:adpro
ID: 16894855
i dotn think so how do i set that ?
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
How to simulate latency? 5 40
Wireless scope on sever with DSL connection 9 35
Windows PE .WIM files WDS issue 4 28
Swapping port on a  Cisco 5510 firewall 1 21
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
For many of us, the  holiday season kindles the natural urge to give back to our friends, family members and communities. While it's easy for friends to notice the impact of such deeds, understanding the contributions of businesses and enterprises i…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question