Improve company productivity with a Business Account.Sign Up

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 323
  • Last Modified:

2 Locations thru Tunnel can't ping any computer from either side

I have 2 Windows 2003 Servers in 1 Domain at 2 Locations. They are connected thru a Dedicated Tunnel.

I can't ping a computer from one side to the other side.

Here is my setup

Server1  192.168.0.X
Server2  192.168.1.X

Thanks,
Rick
0
ITRick
Asked:
ITRick
  • 2
1 Solution
 
jvandewayCommented:
It sounds like there is a problem with the routes in your tunnel, assuming the tunnel is up and active.  What are you using to establish the tunnel?
0
 
ITRickAuthor Commented:
Linksys rounter.

The tunnels are working fine I can access each server and ping each server just can't ping workstations
0
 
jvandewayCommented:
interesting, are there any firewalls on the workstations that would be causing them to deny pings.  

you may want to ensure that your access list permits traffic from one end to get to anything on the other end and it isn't somehow restricted to your DC ip address.

since your workstations on each end are working fine then i assume that the network settings are properly configured, but it may be something to verify.

0
 
tatwCommented:
Are you enabled the windows firewall on the workstation? Winxp with SP2 turns on the firewall by default.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Get expert help—faster!

Need expert help—fast? Use the Help Bell for personalized assistance getting answers to your important questions.

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now