Solved

Cisco 2600 to Cisco 2600 VPN Connection

Posted on 2006-06-11
3
261 Views
Last Modified: 2012-05-05
I have a Cisco 2600 router connected to 7 other 2600 routers via a IPSEC Vpn connection.  All of the tunnels are established.  4 of the tunnesl are passing traffic which therefore allows my Win 2003 servers to replicate properly.  I have the remaining three tunnels that are connected but not passing traffic between via the tunnel.  I checke the configs of the satellite routers and they are identical except for one thing.  The working routers show the source of the VPN connection being the router at the main office.  The ones that aren't working show the satellite router as being being the source of the VPN connection, which is why I think they are connected but not passing traffic.  The routers are running 12.2 IOS on them.

Please advise.

Thanks,

Jvandeway
0
Comment
Question by:jvandeway
  • 2
3 Comments
 
LVL 9

Accepted Solution

by:
stressedout2004 earned 500 total points
ID: 16886730
>>>The working routers show the source of the VPN connection being the router at the main office.  The ones that aren't working show the satellite router as being being the source of the VPN connection, which is why I think they are connected but not passing traffic

--> Are you referring to the source IP when doing the command "sh crypto isa sa"?

When you do "sh crypto ipsec sa" do you see any encrypt or decrypt?

0
 

Author Comment

by:jvandeway
ID: 16896184
oops, sorry didn't mean to close the ticket.
0
 

Author Comment

by:jvandeway
ID: 16945705
ok I got the vpn tunnels up (with some help from a friend) but on one of the routers VPN works fine, but it isn't passing traffic from the inside of the network to the outside.  i can access the router remotely from the outside and ping both a website and an internal IP address.

here is my route on the router: 0.0.0.0 0.0.0.0 isp.gateway.ip.address

i thought that is what would send internet traffic to the outside... any ideas?
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Do you have an old router lying around the house that you don’t know what to do with? Check the make and model, then refer to either of these links to see if its compatible. http://www.dd-wrt.com/site/support/router-database http://www.dd-wrt.c…
I've written this article to illustrate how we can implement a Dynamic Multipoint VPN (DMVPN) with both hub and spokes having a dynamically assigned non-broadcast multiple-access (NBMA) network IP (public IP). Here is the basic setup of DMVPN Pha…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

863 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

18 Experts available now in Live!

Get 1:1 Help Now