Solved

Netcreen 5XP VPN Client-to-site sw ver4.0.1r3.0

Posted on 2006-06-11
1
268 Views
Last Modified: 2012-08-13
I need a way to connect external XP/W2k clients to the office with full access to the lan.
I want to use native windows VPN not netscreen VPN software.
I installed RAS on my w2003 box, tried to get PPTP vpn to work, failed
I tried VPN shared key directly to netscreen with windows client and failed.
My config is now a big mess from me playing around.
I cannot wipe the config.

I need a config I can paste in using telnet.
I dont care which VPN config, directly to netscreen setting up each client individually or windows L2TP/PPTP.

I have a netscreen 5xp doing nat for my intenal clients
Internal network 192.168.1.x
There is an existing tunnel (works fine) from this office to another, 2nd office is 192.168.100.x

0
Comment
Question by:akourafas
1 Comment
 
LVL 9

Accepted Solution

by:
jabiii earned 500 total points
ID: 16887876
This should work the same.
http://kb.juniper.net/CUSTOMERSERVICE/index?page=kbdetail&record_id=0244022611e8310108012c3c1901496

There's also an example in the Concepts and examples for 4.0

40 doesn't say anything about XP. only about 2k.

If this doesn't help you let me know i will play around with it on my boxes for you.hopefully it will be the same on the 5.0 version.

but before we start making changes, what errors are you seeing?
can you snip the related information (ike/gateway/objects/policy) and clean it (change IP's etc) and post it ?
0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you are like regular user of computer nowadays, a good bet that your home computer is on right now, all exposed to world of Internet to be exploited by somebody you do not know and you never will. Internet security issues has been getting worse d…
To setup a SonicWALL for policy based routing to be used with the Websense Content Gateway there are several steps that need to be completed. Below is a rough guide for accomplishing this. One thing of note is this guide is intended to assist in the…
Established in 1997, Technology Architects has become one of the most reputable technology solutions companies in the country. TA have been providing businesses with cost effective state-of-the-art solutions and unparalleled service that is designed…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question