Solved

Diverting Internet traffic

Posted on 2006-06-13
7
524 Views
Last Modified: 2013-11-16
Hi guys,

I have a problem for which I look forward to u guys 4 help.

I have too many people having internet access and there is one single ADSL line giving them access to http traffic. There is another leased line which gives access to only email traffic and vpn and all. I wanna have another ADSL line on which I want to keep some specified users and allow them to access internet through tht line and rest will be goin through the existing ADSL line.

I wanna know do we have some device wherein I can combine all these lines and divert there own traffic on to the specified lines. I have ISA server in place through which every user passes and then the traffic goes on to cisco pix firewall and then it goes to the router and then internet.

Waiting 4 comments eagerly

Thanks
0
Comment
Question by:faisal_n_k
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
7 Comments
 
LVL 11

Accepted Solution

by:
rafael_acc earned 25 total points
ID: 16893272
so the additional adsl line would come to the same router??
Can you actually make a diagram on your topology ...

This can be achieved by routing traffic accordingly. Depending on your topology, this can be configured on the ISA box, router or even Pix.

Cheers
0
 

Author Comment

by:faisal_n_k
ID: 16893287
thts wht i wanna check whether i have to have one device only for all three lines or seperate devices will do the job
0
 
LVL 11

Expert Comment

by:rafael_acc
ID: 16893320
It depends on the devices actually. Separate devices would also do it, depending on how/where you place them ... That's why I asked for a sort of diagram.

Cheers
0
 

Author Comment

by:faisal_n_k
ID: 16893392
thnks 4 the guidance dear lemme check it on pix and then if needed i wud surely seek ur help.

thnks & cheers  
0
 

Assisted Solution

by:cd92k4
cd92k4 earned 25 total points
ID: 16901005
You have two diffrent Internet connections & you wish to combine them together and also impose security so as to you can define users/groups to utilise specific services only right?
OK if you wish to do so from the ISA Module then you can do it by imposing policy onto those users You want to give access to particular services.

If you wish to use managable hardware you can do it as under:
Use a Dual/Quad Wan Router/ Load Balancer i.e. Device 1 (Where your ADSL Internet connection terminate.) from this
Device 1 -->  connect it to either a Layer 2 or Layer 3 Switch.. Device 2  (periheral that can alow VPN Pass through)
i either of these Layer 2/3 Switches you can specify groups/ VLan's specific to the usage of particular entities.

By using Loadbalancer you can either aggregate or segregate your bandwith and also create a single tunnel for access to the internet making your device/Network maintainance easier.
Dual/Quad  Wan Routers/ Load Balancers you could find in Cisco, LInksys, D-Link, Netgear etc Companies.

Dual/Quad Router/Loadbalancer --> Firewall --> Layer 2/3 Switch --> Existing Network (An Example)
Warm Regards,
0

Featured Post

Building an interactive eFuture classroom

Watch and learn how ATEN provided a total control system solution including seamless switching matrix switch, HDBaseT extenders, PDU, lighting control to build an interactive eFuture classroom.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When speed and performance are vital to revenue, companies must have complete confidence in their cloud environment.
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…
Suggested Courses

626 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question