Solved

3725 Router question

Posted on 2006-06-14
1
324 Views
Last Modified: 2013-11-29
brought a used cisco 3725 with an IOS ver 12.2(15)T5

according to the SDM installation the SDM supported IOS versions are 12.2(11)T6 or later 12.3(2)T or later 12.3(1)M or later 12.3(4)XD 12.2(15)ZJ3. Does it matter that we do not have the IOS listed above we tried to turn on the Telnet with ssh that command does not exist and the https server also does not exist. When I try to log into the SDM it say that the telnet password is incorrect even though I have changed it through the console several times.
0
Comment
Question by:arahming
1 Comment
 
LVL 15

Accepted Solution

by:
nprignano earned 500 total points
ID: 16902514
the SDM and your IOS are incompatible.  You need to change the IOS and reinstall the SDM:
http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/prod_release_note09186a008021e9bb.html


nprignano
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
EIGRP Configuration 2 46
How computer Arp Table gets populated. 21 86
forward schedule of change 1 11
Is WiFi half-duplex or Full -duplex 4 31
Even if you have implemented a Mobile Device Management solution company wide, it is a good idea to make sure you are taking into account all of the major risks to your electronic protected health information (ePHI).
If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

932 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now