Solved

accessing clipper application from remote location

Posted on 2006-06-15
2
301 Views
Last Modified: 2010-05-18
HELLO EXPERT,

I HAVE A ACCOUNTING SOFTWARE WRIITEN using "CLIPPER"
THE ACCOUNTING APPLICATION IS LOCATED AT MY HEAD OFFICE.

HERE IS AN OUTLINE OF MY NETWORK TOPOLOGY.

HEAD OFFICE:

WINDOWS NT SERVER CONTAINING THE CLIPPER APPLICATION
BAYSTACK ROUTER
NORTEL SWITCH
CSU/DSU FOR WAN CONNECTIONS

SUBOFFICE A ANB B ( each about 64 mile from head office)

BAYSTACK ROUTER
NORTEL SWITCH
CSU/DSC.

I AM ATTEMPTING TO ALLOW CLIENTS AT THE SUBOFFICES A AND B
TO HAVE ACCESS TO THE ACCOUNTING SOFTWARE.
IS THIS POSSIBLE WITH CLIPPER?

SIZE OF DATABASE AND PROGRAM FILES AROUND 250MB .
THANK YOU
0
Comment
Question by:jomfra
2 Comments
 
LVL 15

Accepted Solution

by:
bpmurray earned 500 total points
ID: 16914067
First, and most urgently, turn OFF your caps lock! Nobody likes shouting.

Next, the hardware is largely irrelevant since this is really a software issue.

It's  a while since I played with Clipper, but I remember it as being a DOS-based solution. If this is the case, then you can use telnet to connect to the head office server, and run it that way. Of course, you have to start the telnet server before this works; then run "telnet <servername>" from the sub-office, and log in using the usual Windows username & password; then run the Clipper app.
0
 

Author Comment

by:jomfra
ID: 16919350
hello Bpmurray,
Sorry about the caps lock.
Will try your suggestion.
thanks
0

Featured Post

Free Tool: Site Down Detector

Helpful to verify reports of your own downtime, or to double check a downed website you are trying to access.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Does the idea of dealing with bits scare or confuse you? Does it seem like a waste of time in an age where we all have terabytes of storage? If so, you're missing out on one of the core tools in every professional programmer's toolbox. Learn how to …
This is about my first experience with programming Arduino.

830 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question