Solved

How to check the time stamp of DNS RR

Posted on 2006-06-19
3
408 Views
Last Modified: 2012-06-27
I have looked on the DNS records and found many machines they share the same IP addresses. and I wanted to know if some of the records are stale and waitingto be scavenged, but I can't tell if I don't see the time stamp on them, how can I check that?

Some of the machines they don't cause any problem, but some of them they can not refresh the record.

I have read somewhere here: http://www.eventid.net/display.asp?eventid=11163&eventno=1746&source=DnsApi&phase=1

and it sounds like our issue is similar to what is said in the following comment:

""This problem can also occur on machines which have been cloned. This will result in the machine`s A PTR record being unreadable/writeable by the relevant machine. As per Brian Collins' comment, check the permissions for the A record are not owned by the wrong machine or a deleted account (characterised by unknown SID message).""

In fact in our network, OS has been migrated from W2K PRO to XP PRO using Ghost Image.

DHCP lease is set to 24 Hrs /DNS No Refresh 7 Days /DNS refresh 7 days


0
Comment
Question by:jskfan
3 Comments
 
LVL 30

Expert Comment

by:ded9
ID: 16936163
0
 

Author Comment

by:jskfan
ID: 16936409
I have been to the link above before I posted the question, but it doesn't have answers to my question
0
 
LVL 7

Accepted Solution

by:
Kumar_Jayant123 earned 350 total points
ID: 16940407
Hi,

This is what you need to do.

Open DNS
Click on View Menu
Click on Advanced

Now you will notice that the Cached zone comes up.

Open you Forward or revers lookup zone.
Click the 'A' or 'PTR' record and it will show you the Timstamp.

Hope this is what you are looking for...
Kumar

0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

911 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

25 Experts available now in Live!

Get 1:1 Help Now