Solved

Domain Controllers Over VPN

Posted on 2006-06-19
6
372 Views
Last Modified: 2010-04-12
I am going to try and setup a VPN using the following two VPN servers:

(1) Netgear FVS338 8 port 50 user VPN
(2) Netgear FVS114 4 port 8  user VPN

I want to have a windows domain controller plugged into (1), will computers plugged in behind (2) be able to authenticate on the domain controller and map drives etc?

0
Comment
Question by:dignified
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 3
6 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 125 total points
ID: 16939279
Absolutely, as long as  you set the client up with the proper DNS server that has the SRV records in it (assuming Active Directory)...
The Netgear may also have an option for the VPN to allow NetBios so be sure and check that if it does.
0
 

Author Comment

by:dignified
ID: 16940414
I am trying to test things right now. I don't currently have access to two public static IPs so I am just trying to get things setup by using all internal LAN IPs.

I currently have things setup as follows:

DSL router (192.168.1.1)
  *____________ (FVS338) (WAN: 192.168.1.101 | LAN: 192.168.10.1) (server)
  |                        *_________ Workstation 192.168.10.2
  |
  |_____________ (FVS114) (WAN: 192.168.1.100 | LAN: 192.168.50.1) (client)
                           *_________ Workstation 192.168.50.2

I am trying to get the two VPN boxes to talk to one another using the VPN Wizard. I have the FVS338 set to connect to a VPN client and the other to Connect to a VPN server. But no luck so far. I can't get  the workstations to ping one another.

I just called Netgear tech support in India and they said that you NEED to have each VPN box to be connected to a public WAN ip address. Is this right? Can it not be done using all internal IP addresses?
0
 
LVL 79

Expert Comment

by:lrmoore
ID: 16941659
You can do it in a lab, but each FVS needs a default gateway. Do they both point to the DSL router?
You can try pointing each one to the other as the DG.
ie. FVS338 points DG to 192.168.1.100 and vice versa for the FVS114
0
Are You Headed to Black Hat USA 2017?

Getting ready for Black Hat next week? Kick things off with the WatchGuard Badge Challenge and test your puzzle and cipher skills. Do you have what it takes to earn our limited edition Firebox Badge? Get started today - https://crimsonthorn.net

 

Author Comment

by:dignified
ID: 16945912
Right now they both are using the DSL router as a gateway.
0
 
LVL 79

Expert Comment

by:lrmoore
ID: 16946002
Try pointing them to each other . . .
0
 

Author Comment

by:dignified
ID: 16947548
hmm, still doesn't work. I wonder if I am setting up the VPN itself right, perhaps I will call netgear back and then tell them I have public IP addresses just so they will tell me the next steps that need to be taken
0

Featured Post

On Demand Webinar: Networking for the Cloud Era

Ready to improve network connectivity? Watch this webinar to learn how SD-WANs and a one-click instant connect tool can boost provisions, deployment, and management of your cloud connection.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I've had to do a bit of research to setup my VPN connection so that Clients can access Windows Server 2008 network shares.  I have a Cisco ASA 5510 firewall.  I found an article which was extremely useful: It had a solution if you use ASDM to config…
OpenVPN is a great open source VPN server that is capable of providing quick and easy VPN access to your network on the cheap.  By default the software is configured to allow open access to your network.  But what if you want to restrict users to on…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

636 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question