Solved

Dynamic IP and DNS with a NAT

Posted on 2006-06-20
3
382 Views
Last Modified: 2010-03-18
I have a single dynamic IP. What I think I can do is sign up for an account at dyndns and get something like mydomain.dyndns.tld, set it to my ip (a router with nat). At my registrar for my real domain, set the dns servers to mydomain.dyndns.tld. I forward the port to the correct private IP. I can then use my own DNS servers and set them up how I wish. First of all, will this work? Second, how do I solve the problem of the DNS server being on a private IP? In other words, how do I update my DNS servers with my dynamic public IP when it is behind the NAT?
0
Comment
Question by:smpolymen
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
3 Comments
 
LVL 16

Accepted Solution

by:
Blaz earned 500 total points
ID: 16948645
For a good setup of DNS you need two DNS servers on two different networks (ie if one network crashes completely, the other should be accessible). Each DNS server should have a static IP.

It would still be posible to put a single DNS server on a dynamic IP, but that is VERY poor design. Your DNS record should point to mydomain.dyndns.tld and not to an IP.
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
This is my first video review of Microsoft Bookings, I will be doing a part two with a bit more information, but wanted to get this out to you folks.

707 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question