Solved

Can't get into router configuration panel...

Posted on 2006-06-20
5
357 Views
Last Modified: 2010-04-17
http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1119591402181&packedargs=site%3DUS&pagename=Linksys%2FCommon%2FVisitorWrapper

That's the router I have. I've tried typing in http://192.168.1.1, I've tried http://192.168.0.1 (even though that's not linksys's port), I've tried resetting the router a variety of different ways, every time I hold down the reset button it's for a minimum of 15 seconds, I've tried doing that with it off, then on, then off & on again, I've tried holding it down for 30 seconds, etc; etc. but no matter what I do I can not get the login screen to come up. I've tried this on 2 different computers, exact same thing happens.

Any suggestions would be greatly appreciated. I apologize for the amount of points on this but it's all I have & it's important for me to get into that panel so I can configure it for some of my p2p programs to work.

Thanks in advance.
0
Comment
Question by:Marker0077
  • 3
5 Comments
 
LVL 14

Expert Comment

by:FriarTuk
ID: 16950578
try 192.168.0.15
0
 
LVL 14

Expert Comment

by:FriarTuk
ID: 16950583
typo, should be 192.168.15.0
0
 
LVL 14

Assisted Solution

by:FriarTuk
FriarTuk earned 57 total points
ID: 16950587
another typo, try 192.168.15.1
0
 

Accepted Solution

by:
MartinTrouman earned 58 total points
ID: 16967664
yes should be 192.168.15.1
make sure you have no antivirus or firewalls active
make sure that the Explorer is not using a proxy server: Internet options>Connection>LAN settings

0
 
LVL 1

Author Comment

by:Marker0077
ID: 16986982
Alright, I have no idea why this is working now. I tried this so many times with that IP, resetting it, trying it again, etc; etc. but for whatever reason, it's working now. The only thing I can imagine that's different is I just installed Norton AV & it disables the Win Firewall... I don't know. As long as it's working & I can configure the router, I'm a happy camper. Thanks folks.
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question