Solved

CISCO VPN between more than two sites

Posted on 2006-06-20
1
223 Views
Last Modified: 2010-04-17
What is the best way to connect 3 sites together via VPN? Can I just use three small 837 routers with two vpn tunnels? Can I have three vpn tunnels so that any site can directly access any other?
Thankyou
0
Comment
Question by:spoonerism
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 19

Accepted Solution

by:
nodisco earned 250 total points
ID: 16950008
hi spoonerism
Here is a diagram for creating a full meshed IOS vpn network between 3 sites:
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008014f8ab.shtml

With small networks, static routes will perform this fine for you - if you had a much bigger network with several different seperate subnets at your sites, you could use Tunnel interfaces and configure Eigrp to manage the routing for you.

hth
0

Featured Post

Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Setting up a VPN 60 205
ip igmp join-group 8 72
Static Route on Cisco ISR 4431's 4 35
Cisco home labs 2 networks unable to place calls across network 7960 voip phones 23 53
In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

733 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question