?
Solved

how much dram and flash do I have on my 1721 router.

Posted on 2006-06-21
2
Medium Priority
?
533 Views
Last Modified: 2011-10-03
Hello

I have a 1721 router.

here's the memory part of my sh ver:

cisco 1721 (MPC860P) processor (revision 0x200) with 54255K/11281K bytes of memory.
when I do sh flash:

File  Length   Name/status
  1   5515072  c1700-y-mz.123-1a.bin  
  2   1951     alternate-config-with-routes  
[5517152 bytes used, 27775136 available, 33292288 total]
32768K bytes of processor board System flash (Read/Write)

now, can I use the below IOS on this router:

File name Min. Memory(MB) 48  
Min. Flash: (MB) 16

c1700-y-mz.124-8.bin
 
0
Comment
Question by:eggster34
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 2000 total points
ID: 16955665
> 54255K/11281K
Add them together you get 64MB DRAM

>32768K
Looks like 32Mb Flash

Yes, you can use that version..
0
 

Author Comment

by:eggster34
ID: 16963613
many thanks indeed.
0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses

764 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question