Solved

Remote User unable to logon toTerminal Services

Posted on 2006-06-22
1
288 Views
Last Modified: 2013-11-21
Term Srv is running Windows Server 2003. For the past several months, I am needing to reboot the server to enable users to log on to terminal services. This happens more times than not. It seems that users can logon once remotely, and then they are unable to log on additional times, unless I reboot the server...how efficient is that?
What do you think is causing this issue?
0
Comment
Question by:Lyndy333
1 Comment
 
LVL 14

Accepted Solution

by:
ECNSSMT earned 500 total points
ID: 16960650
Sounds like the users are not being logged off of TS after their first session.  I unfortunately don't deal with the inner workings specifically for TS, but check the TS manager to see either if there are users on there for a very long period of time (maybe in idle), or they are listed as disconnected.  

The solution may be as simple as setting a timeout.  The worse thing would probably be to check TS manager every so often and manually logging out users that are idle or disconnected.

Regards
0

Featured Post

Optimizing Cloud Backup for Low Bandwidth

With cloud storage prices going down a growing number of SMBs start to use it for backup storage. Unfortunately, business data volume rarely fits the average Internet speed. This article provides an overview of main Internet speed challenges and reveals backup best practices.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Know what services you can and cannot, should and should not combine on your server.
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

863 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

18 Experts available now in Live!

Get 1:1 Help Now