[Last Call] Learn how to a build a cloud-first strategyRegister Now

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 907
  • Last Modified:

Troubleshooting event id raid error

Hi,

I have a windows 2000 Advanced Server SP4 which comes up with the following event log error.

Event ID:1026
Source: LsaSrv
Description:

The driver has detected a path failure to subsystem ID
50001FE15001E970.Dump Data contains phys disk Info <Port / Bus/Target/Lun>.
Dump Data 1 contains the driver status. Dump Data 2 contains the HBA slot number (ffffffff if unavailable). Dump Data 3 contains extended Driver Status.

Now I would like to know where can I get this dumpdata and troubleshoot what is causing this. Reason I am so worried is because one of the other servers in same server vault has now crashed with HHD corrup in disk array. So I think their IT gyus are not looking after the servers properly.

Rgds,

Johan
0
johanvz1
Asked:
johanvz1
1 Solution
 
NetExpertCommented:
The dump data is in the box below the description area (which shows "Dump Data contains phys disk Info <Port / Bus/Target/Lun>...." etc) of the Even Properties window, can be displayed in words or bytes, both of them are just almost useless string of data (something like
0000: 00 00 00 00 01 00 be 00   ......¾.
0008: 02 00 00 00 39 00 04 80   ....9..&#128;
0010: 00 00 00 00 0e 00 00 c0   .......À
0018: 00 00 00 00 00 00 00 00   ........
0020: 00 00 00 00 00 00 00 00   ........).

You have to check other events to see which causes the problem. This even only notifies that you have a path failure, which could be network if you have network drive, or corrupt disk, etc.
0

Featured Post

Reclaim your office - Try the MB 660 headset now!

High level of background noise often makes it difficult for employees to concentrate fully on their jobs – or to communicate clearly on calls. The MB 660 headset helps you create a disruption free workspace.  

Tackle projects and never again get stuck behind a technical roadblock.
Join Now