Solved

Cisco VPN 3000 Concentrator

Posted on 2006-06-23
4
303 Views
Last Modified: 2010-04-12
We have a Cisco VPN 3000 concentrator in our company Network. I would like to assign a static IP to the clients that connect to it because with dynamically assigned IPs we are having problems with a specific application that has an IP database to give access to registered IPs. Is there a way on the 3000 concentrator to assignes the same IP address to a client every time they connect to the VPN? if so is there a liminted number of users or can I do it for as many users as the concentrator can handle?

Thanks
0
Comment
Question by:rh102801
  • 2
4 Comments
 
LVL 9

Expert Comment

by:stressedout2004
ID: 16973997
It depends. What kind of authentication are you running on the VPN3000? Are you doing external authentication or internal authentication?
0
 

Author Comment

by:rh102801
ID: 16980800
Internal. Would I have to use a radius server to acomplish what I need done?
0
 
LVL 9

Accepted Solution

by:
stressedout2004 earned 300 total points
ID: 17005548
If you are doing extended authentication for your remote VPN connections, then you can assign the same IP address to them every time they connect by doing the following:

1. Go to Configuration | System | Address Management | Assignment and enable "Use address from authentication server"

2. Go to Configuration | User Management | Users and select the users you want to assign a specific IP address to then click on "modify"

3. Once you are inside the "Configuration | User Management | Users | Modify" screen, under Identity tab, fill out the
"IP address" and the "Subnet Mask" parameters with the corresponding values.

Note: Make sure that you exclude the IP address that you will be statically assigning from the address pool or DHCP server .

0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Random Terminal Server disconnections. 2 230
Microsoft VPN Client error 7 44
RRAS computer has too many IP addresses 24 39
Bizarre IP Address / Port Blocking Windows 7 13 55
Overview Often, we set up VPN appliances where the connected clients are on a separate subnet and the company will have alternate internet connections and do not use this particular device as the gateway for certain servers or clients. In this case…
If you use NetMotion Mobility on your PC and plan to upgrade to Windows 10, it may not work unless you take these steps.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

685 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question