Solved

Help setting up speedtouch 546 and sonicwall tz150 with two static ip addresses

Posted on 2006-06-24
4
806 Views
Last Modified: 2012-06-27
Hi all,

The equipment that we have is as follows:

Speedtouch 546
Sonicwall TZ150
ISP providing 2 static ip addresses


What I want ti achieve:

To conect to the ISP with the speedtouch and place the sonicwall TZ150 between the speedtouch and the company LAN to enable us to work remotly via the VPN available on the TZ150 (Using the Global VPN Client, We have purchased 2 VPN licences form sonicwall).


What I have at the moment:

I have conected the speedtouch to the Broardband connection and the LAN (without the TZ150) and using DHCP on the speedtouch, all is well, internet, email etc, no problem. When I introduce the TZ150, I am unable to reach the internet etc from the LAN. I have tried all the settings that I can think of but seem to be getting nowhere, I think that I have reached the point of confusing myself, and cannot see the wood for the trees.


What I am looking for:

Some kind person to help me set this up via step-by-step explanations, diagrams (or telepathy!) whatever it takes to get this working. I have an understanding of networks, however, I am not a guru, and have yet to master the art of NAT.
Any help would be greatly appreciated.

Thanks for taking the time to read.
Any further info required, please ask,

Keith
0
Comment
Question by:kalees
  • 3
4 Comments
 
LVL 6

Accepted Solution

by:
Booda2us earned 500 total points
ID: 16977270
Hello Kalees, check this link for a walk thru:
http://www.sonicwall.com/support/pdfs/technotes/VPN_Interoperability_Between_SonicWALL_TZ_170_SP_SonicOS_E….pdf
substitute your info and you should be tunneling thru ....Booda2us
optionally contact me and I'll send you the tech notes.
0
 
LVL 6

Expert Comment

by:Booda2us
ID: 16977282
Kalees, also check this link for everything you'll ever need to know about your TZ150:
http://www.sonicwall.com/support/tz170_documentation.html
...Booda2us
0
 

Author Comment

by:kalees
ID: 16986256
Booda2us,

thamks for the links, i will not be looking at this project until this weekend so will let you know how i go on. Do you have any specific information for setting up the speedtouch?

Keith
0
 
LVL 6

Expert Comment

by:Booda2us
ID: 16987988
Kalees<
Go to the Speedtouch webpages, in the Menu select Home Network>Devices, click the TZ150, or if it hasn't been personalized yet, click the MAC address of the TZ150.  On the top right clik. Configure. Now you can change the name and lock its IP address, and assign applications and services. As I am not aware of how you are accessing the configuration this is one method.I suggest you download the following:
http://www.speedtouch.com/pdf/Manuals/R531/ST546_UserGuide.pdf
Hope this helps...Booda2us
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Monitor noise on dsl line 10 337
Bt phone line & cisco 837 & asa5505 connection advice 35 81
Geolocation 2 57
Multiple Static IP addresses on Router 14 105
Cable Modem Provisioning from DPoE compliant server  This Article is to support CMTS administrators to provide an overview of DOCSIS compliance configuration file, and to provision a cable modem located at customer place from a Back office serve…
Sometimes you have to pull out old tricks to get a new firewall to work… While we were installing a new Sonicwall at a customers site we found that sites they were able to visit before were not working.  It seemed random and we could not understa…
Learn how to create flexible layouts using relative units in CSS.  New relative units added in CSS3 include vw(viewports width), vh(viewports height), vmin(minimum of viewports height and width), and vmax (maximum of viewports height and width).
Many functions in Excel can make decisions. The most simple of these is the IF function: it returns a value depending on whether a condition you describe is true or false. Once you get the hang of using the IF function, you will find it easier to us…

920 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

15 Experts available now in Live!

Get 1:1 Help Now