Solved

RV042 with a MAC

Posted on 2006-06-26
2
447 Views
Last Modified: 2011-09-20
Hi I have an RV042 router and I am trying to use my VPN over it.  If I use Quick VPN from a PC I can connect to my server no problem. If I try to connect to the router via PPTP i can connect with out a problem.   However, when I go to type the address of ther server it won't connect.  I know I am connected to the RTV042 through the pptp because if I enter the IP address of the router I get the settings menu.  Does anyone have any ideas what I am doing wrong?  Why can't I connect to my server?  Thanks in advance for your help!!
0
Comment
Question by:brandonfishman
  • 2
2 Comments
 
LVL 77

Accepted Solution

by:
Rob Williams earned 500 total points
ID: 16988616
If the QuickVPN client is working why not use it. Simpler, and it's IPSec encryption is a little more secure.

However.......
-Do the remote and local sites use a different subnets? They need to.
-Is the Windows firewall, or any other software firewall enabled on the server? Probably not if you can connect with the QuickVPN.
-When you say you cannot connect do you mean by name or IP.  If not by name try using the IP, such as \\192.168.0.123\ShareName   If this works it is a name resolution issue and we can address that.
0
 
LVL 77

Expert Comment

by:Rob Williams
ID: 16989147
Thanks brandonfishman,
--Rob
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
If you use NetMotion Mobility on your PC and plan to upgrade to Windows 10, it may not work unless you take these steps.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question