Solved

Recovering from SATA II RAID Controller Failure

Posted on 2006-06-27
4
848 Views
Last Modified: 2008-02-01
I have a an ADAPTEC 2610 SA - SATA II Raid controller, on which i built Hardware RAID with 5 SATA II Harddisk drives, the controller card failed, when i replaced the controller i am not seeing the volume, i believe the RAID information is stored in the Harddisk Drives, how to recover the volume ?

Please help

Chandrasekhar Banala
0
Comment
Question by:banala
  • 2
4 Comments
 
LVL 15

Accepted Solution

by:
mcp_jon earned 250 total points
ID: 16991472
Go to the Controller Bios and try to create a new Volume. When asked, choose "Get info from the Dsiks "

This should do it !

Best Regards !
0
 
LVL 15

Expert Comment

by:mcp_jon
ID: 17599274
Proceed !

Best Regards !
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

We wanted to provide an in-depth explanation of the Ping Node offering clarifications on its function and usage. Incorrect Ping Node configuration and functionality can cause problems with HA clusters. The importance of this article is critical for …
In this article, I provide some information on storage disks which go into calculations that will help you figure out how much Input/output Operations Per Second (IOPS) your disk subsystem can deliver. To effectively size & tune up applications l…
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

747 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now