Solved

VPN client  4.6.02.0011  can't save changes on Windows log on properties.

Posted on 2006-06-27
3
235 Views
Last Modified: 2010-04-12


  I'm using VPN client version 4.6.02.0011 on Win xp serv pk 2. If I go to option - Windows logon properties - and check the box  - Enable start before logon - click OK , the system does not save this  option. When, I go back the  
- Enable start before logon -  is uncheck . I 'm not able to save anychange in the software. We have more computers in the network and most of them we dont have this problem ( same OS Win xp svc pk 2). My question is,   What is preventing us to save changes??



Thank you  
0
Comment
Question by:yeru777
3 Comments
 
LVL 32

Accepted Solution

by:
rsivanandan earned 250 total points
ID: 16998925
There were so many incompatibilities with 4.6 and XP-SP2. The best that works is 4.8 which is available. I would suggest you to try installing that and see if it works by then.

Cheers,
Rajesh
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Sonicwall SRA no lan access 5 31
cannot connect to openvpn server 9 77
Setting up L2TP/IPsec in RRAS 5 18
VPN between Juniper ssg140 (Static IP) to ASA 5500 (Dynamic IP) 23 23
I've had to do a bit of research to setup my VPN connection so that Clients can access Windows Server 2008 network shares.  I have a Cisco ASA 5510 firewall.  I found an article which was extremely useful: It had a solution if you use ASDM to config…
I've written this article to illustrate how we can implement a Dynamic Multipoint VPN (DMVPN) with both hub and spokes having a dynamically assigned non-broadcast multiple-access (NBMA) network IP (public IP). Here is the basic setup of DMVPN Pha…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

832 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question