Solved

VPN Not getting IP address

Posted on 2006-06-29
1
280 Views
Last Modified: 2010-04-12
We have a working VPN, that is not issuing IP addreses. It authentiates and registers itself on the network, but then does not get an ip address.

How to fix?

Thanks in advance.

0
Comment
Question by:DrDamnit
1 Comment
 
LVL 4

Accepted Solution

by:
Shaun84 earned 500 total points
ID: 17011081
What VPN are you using?
if it is a windows VPN.
On the server, right click on the VPN then go to properties then go to the networking tab , highlight TCP/ip and go into the properties. Put the dot into specify IP addresses and then choose a range
e.g . From 192.168.1.1
to 192.168.1.50
then just OK everything.
That should solve it
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
VPN Connection Failure 22 126
Separating Default Gateway from VPN 2 48
Azure/Sonicwall site to site vpn using aggressive mode 2 104
AnyConnect VPN - No LAN access 1 33
Juniper VPN devices are a popular alternative to using Cisco products. Last year I needed to set up an international site-to-site VPN over the Internet, but the client had high security requirements -- FIPS 140. What and Why of FIPS 140 Federa…
I've written this article to illustrate how we can implement a Dynamic Multipoint VPN (DMVPN) with both hub and spokes having a dynamically assigned non-broadcast multiple-access (NBMA) network IP (public IP). Here is the basic setup of DMVPN Pha…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question