Solved

Routing traffic from perimeter networks

Posted on 2006-06-29
3
476 Views
Last Modified: 2012-06-27
Hi,

We have a sonicwall for our perimeter network and then an ISA server that sits in front of our internal network. I'm having difficulty getting the computers in the perimeter network to see the internal network. Can someone help or maybe point me in the right direction?

We have a T-1 coming into the sonicwall and from the sonicwall to a switch. Sitting behind the sonicwall on the switch are 3 servers and an ISA server. The internal network and ISA can only see the sonicwall but nothing else. Is there a way to route traffic from the other 3 servers to the internal network without having to get a router?

Here are the IP configuration:

            WAN IP
              |
          192.168.10.1 sonicwall lan ip
             |          |          |
     192.168.10.2    192.168.10.3  192.168.10.5
     ISA server       server1        server2
         |
     192.168.100.1 ISA Internal IP
         |
 Internal LAN 192.168.100.XXX
0
Comment
Question by:hiephop
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
3 Comments
 
LVL 16

Accepted Solution

by:
The--Captain earned 250 total points
ID: 17013688
AFAIK, the sonicwall *is* a router, as well as a firewall, and just needs to be configured properly - I have one of these (still in the box, since I roll my own linux firewalls), but since I've seen a number of questions about these devices popping up lately, I suppose I should go plug it in ;-)

Cheers,
-Jon
0

Featured Post

WordPress Tutorial 2: Terminology

An important part of learning any new piece of software is understanding the terminology it uses. Thankfully WordPress uses fairly simple names for everything that make it easy to start using the software.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is a collection of issues that people face from time to time and possible solutions to those issues. I hope you enjoy reading it.
This article is in regards to the Cisco QSFP-4SFP10G-CU1M cables, which are designed to uplink/downlink 40GB ports to 10GB SFP ports. I recently experienced this and found very little configuration documentation on how these are supposed to be confi…
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…
Suggested Courses

630 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question