VDSL Beginner

i have connected a VDSL concentrator
port name "Line" is connected to a PBX
port name "Phone" is connected to telephone

the telephone im using have builtin splitter and wifi router (teledex brand)

in the vdsl switch, i have set the uplink ip as 10.10.1.1
gateway as my internet server 10.10.2.1

when i turn on laptop i can get wifi signal and its taking the ip as 10.10.1.3. gateway 10.10.2.1
but i cant browse internet, what might be the problem?

ammadeyyAsked:
Who is Participating?
 
bhanukir7Connect With a Mentor Commented:
hi

is the port led steady green. the blinking would happen only when there is some data transmission going on.

what is the subnet mask u have given for the ip address,

255.255.255.0 or 255.255.0.0

try to change the subnet mask to 255.255.0.0 or change the ip address to 10.10.2.3 or the the gateway ip address to 10.10.2.1

i.e try to have the same range of ip address unless specified by the ISP.

revert back with the ISP and the model of VDSL

bhanu
0
 
ammadeyyAuthor Commented:
in the switch, the port led is also not blinking
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.