Solved

VOIP network setup - Need design help

Posted on 2006-07-03
6
399 Views
Last Modified: 2007-02-13
Hi,

I want to understand how VOIP works? what equipments would I need? where to get them?
Here is a scenario:
Trying to setup a VOIP - softphone network from anywhere in US to Europe. I am not worried about calls initiated from EU...only calls from US to Europe.
I want to understand what hardware would I need? plus if there is any white paper on per call bandwidth utilization what technology
i need to do billing...design a softphone for consumers....and setup a softswitch? will i need for example AS5300 or anything?
0
Comment
Question by:zeusindc
  • 2
  • 2
6 Comments
 
LVL 15

Accepted Solution

by:
Naser Gabaj earned 125 total points
ID: 17034016
Greetings zeusindc,

Download this e-book:

http://www1.7622.com/Syngress.Practical.VoIP.Security.Mar.2006.pdf

Good Luck!

Naser
0
 

Author Comment

by:zeusindc
ID: 17034448
thanks Naser I will defn. try to go thru this book, but right now I need some quick suggestions. Basically trying to see if i can do a proposal.
I need to know if someone has any experience in this field, and help me with different hardwares/softwares been used? like Cisco Unity anything like this cheaper maybe
IVR solutions etc......

Also want to know maybe a small diag. what components will be needed in such setup.
if anyone can point me to links that would be great...

some stuff like how much bandwitdh would i need for lets say 500 users ..... i need link with some info etc.

thanks

0
 

Author Comment

by:zeusindc
ID: 17103161
any design help means....what components will a VOIP setup would need.
0
 
LVL 15

Expert Comment

by:Naser Gabaj
ID: 17106382
As far as i know:

It's phone system that support voip such as 3com super stack NBX 100 which i have in my network, with it's phones (Basic, Business) that can be configured to assign IP add,
Enough bandwidth that can handle the voice over Internet protocol.
Someone who will configure the VoIP protocols e.g. "H323"

I believe these Links will answer your question in more details:

http://www.voip-news.com/news/features/voip-phone-system-components-062606/
http://www.fcc.gov/voip/

HTH, Good Luck.

Naser
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
Most of the applications these days are on Cloud. Cloud is ubiquitous with many service providers in the market. Since it has many benefits such as cost reduction, software updates, remote access, disaster recovery and much more.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

860 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question