?
Solved

Sharing an iBurst internet connection with a wireless lan router

Posted on 2006-07-04
7
Medium Priority
?
1,193 Views
Last Modified: 2013-11-29
Hi

I've got an iBurst internet connection on my laptop. And I've got a Netgear WGR614 wireless lan router connected to the laptop's ethernet port. I'd like to share this internet connection with the rest of the house.

I gave Microsoft Internet Connection Sharing (ICS) a go. I got to the point where I could see 'Internet Gateway' on the client machine. However, I could not browse on that machine.

I think here's the rub. The netgear router defaults to 192.168.0.1. Also the ICS wizard sets the ethernet port to 192.168.0.1. Could this be the problem? Can this setup be done? Are there any proxies software applications that I can download and run on my machine?

Thanks in advance
nat
0
Comment
Question by:natalieholmgren
  • 4
  • 3
7 Comments
 
LVL 30

Expert Comment

by:ded9
ID: 17036509
0
 

Author Comment

by:natalieholmgren
ID: 17037223
Thanks, I tried out AnalogX and it works... but it's really slow. Hopeful that ICS will work better.
There's an icon on my client machine when I add 192.168.0.1 as my gateway. It even mentions when the iburst card is disconnected... so it seems like it's doing the right thing.

But but but, I don't know what to do on my browser settings.
Automatically detect... put in a proxy.... what do i do???

:)
0
 
LVL 30

Expert Comment

by:ded9
ID: 17038069
proxy while using using Analogx
0
Veeam Disaster Recovery in Microsoft Azure

Veeam PN for Microsoft Azure is a FREE solution designed to simplify and automate the setup of a DR site in Microsoft Azure using lightweight software-defined networking. It reduces the complexity of VPN deployments and is designed for businesses of ALL sizes.

 
LVL 30

Accepted Solution

by:
ded9 earned 375 total points
ID: 17038083
if it slow try this no1
http://www.youngzsoft.net/ccproxy/

Reps
0
 

Author Comment

by:natalieholmgren
ID: 17043049
I'll give it a try...
0
 

Author Comment

by:natalieholmgren
ID: 17090842
Thanks... i got ics to work. My wireless router had the same ip address as my ethernet card.
0
 
LVL 30

Expert Comment

by:ded9
ID: 17091463
Thank You natalieholmgren

Ded9
0

Featured Post

Free recovery tool for Microsoft Active Directory

Veeam Explorer for Microsoft Active Directory provides fast and reliable object-level recovery for Active Directory from a single-pass, agentless backup or storage snapshot — without the need to restore an entire virtual machine or use third-party tools.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Originally, this post was published on Monitis Blog, you can check it here . It goes without saying that technology has transformed society and the very nature of how we live, work, and communicate in ways that would’ve been incomprehensible 5 ye…
In this article I will be showing you how to subnet the easiest way possible for IPv4 (Internet Protocol version 4). This article does not cover IPv6. Keep in mind that subnetting requires lots of practice and time.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Viewers will learn how to properly install and use Secure Shell (SSH) to work on projects or homework remotely. Download Secure Shell: Follow basic installation instructions: Open Secure Shell and use "Quick Connect" to enter credentials includi…

850 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question